Our Brands

Almi

Featured Products

AL1-2E

Outer tube diameter Ø 26.9(3/4″)
Ø 33.7(1″)
Ø 42.4(1_¼”)
Ø 48.3(1_1/2″)
Ø 60.3(2″)
Outer diameter for sink outflow Ø
Max. wall thickness mm. 5
Weight 87kg

The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4″), 33.7 mm (1″), 42.4 mm (1 ¼”), 48.3 mm (1 ½”) and 60.3 mm (2″).

Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!

The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.

All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

AL1-2U

Outer tube diameter Ø 26.9(3/4″)
Ø 33.7(1″)
Ø 42.4(1_¼”)
Ø 48.3(1_1/2″)
Ø 60.3(2″)
Outer diameter for sink outflow Ø22 – Ø 76
Max. wall thickness mm. 5
Weight 93kg

The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4″), 33.7 mm (1″), 42.4 mm (1 ¼”), 48.3 mm (1 ½”) and 60.3 mm (2″) and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows.

Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.

All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

AL150HS

Motor (kW) 4
Grinding diameter mm. Ø20-Ø114.3
Lever operation system Yes
Handwheels operation Yes
Weight 270kg

The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed.The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm.The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials.ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders are equipped with a deburring table.