Piranha Single Operator Ironworkers are capable of performing most applications. However, when two simultaneous operations are required (e.g. punching and notching), a dual operator ironworker fits the bill.

All Dual Operator lronworkers have:

• Large, open punch station—allows unlimited range of optional equipment and special tooling

• Longer strokes/deeper throat depths

• Large platen—for options and special tooling applications

• Long bending capability—optional bending attachments up to 48~

• 10 punch and die sets appropriate to machine tonnage

• One chip bucket

• Automatic 3-position Urethane Hold-Down on Plate, Angle and Bar Shear Stations
  (Manually adjustable hold-downs are standard on P11-35)

• Dual Operator Controls—punch station and shear/coper station. Each station has both a foot pedal and joystick
  (P11-35 has manual control only on shear/coper station)

• Front and Rear Three-Position Electric Joystick Controls
  (P11-35 has manual joystick valve on shear/coper station)

• Set of Plate Shear Knives (4-way)

• Set of Angle Shear Knives (8-way top/4-way bottom)

• Set of Coper Knives (2-way top/4-way bottom)

• Set of Three Coper Table Guides