OMI KOGYO CO.,LTD.
Zip 446-8585 27-7 Shinmei-Cho, Anjo-City, Aichi-Pref, JAPAN
PHONE :0566-75-8111 FAX : 0566-75-4401

| General Information | Flatter Series | Crinkey Cutter  | Rail Drill (NTM-32) |

Engine Type : RAIL DRILL
Type : NTM-32


For full details, please download the operator's manual (6.3MB)

  1. Powered by Strong HONDA GXH50 4-cycle engine,
    (1.8kw/2.5HP by 7,000rpm)

  2. Many kinds of rails can be drilled by changing the templates.

  3. Suitable for emergency or remote place.

  4. Manageable 26kg weight.

  5. Reliable Toggle action Quick clamp

  6. Can be drilling over “Hydraulic Rail Tensioner”

Engine Type Rail Drill NTM-32 Specification

Type

 Engine Type Rail Drill NTM-32 

Engine

 HONDA ENGINE GXH50

Power

 1.8kw(2.5HP) by 7,000rpm
Cutter Rotation Speed 500rpm
Dimensions 870mmL×320mmW×520mmH
Hole position Accuracy Vertical/Horizon Within ±0.5
Accessories
  • TEMPLATES FOR POSITIONING THE DRILL
    UIC60----1(Can be used both  for “N”80.95mm and “F” 76.25mm)
    UIC54----1 (“F” 69.6mm)

  • Hole Distance Gage----1(46×165)

  • Hole Height Gage    UIC60-----1  UIC54-----1

  • Center Pin for NTM-Cutter------1

  • MT2ShankDrifter-----1        * Hammer-------------1

  • Hexagon Wrench #5-----1     *19mm Spanner-----1

  • OPELATER’S MANUAL-----------1

  • Engine  plug wrench-----------------1  

  • Cup of Grease---------------------------1

  • Tool  Box---------------------------------1

For full details, please download the operator's manual (6.3MB)